Memory Timing; Cas Latency Time - LanParty JR 790gx m2rs User Manual

3
BIOS Setup
MCT Memory Timing
Move the cursor to this field and press <Enter>, the following
screen will appear:
x 2T Mode
x CAS Latency Time
x Precharge Delay (tRAS)
x DRAM RAS# Precharge
x DRAM RAS# to CAS# Delay
x Bank to Bank Cmd (TRRD)
x TRC
x TRTP
x Write Recovery (TWR)
x Write-Read Command (TWTR)
x TRFC0
x TRFC1
x TRFC2
x TRFC3
x Trdrd
↑↓
: Move
F5: Previous Values
The screen above list all the fields available in the MCT Memory Timing submenu,
for ease of reference in this manual. In the actual CMOS setup, you have to use
the scroll bar to view the fields. The settings on the screen are for reference only.
Your version may not be identical to this one.
MCT Memory Timing
Auto
Manual
2T Mode
This field is used to configure the 2T mode.

CAS Latency Time

This field is used to select the clock cycles for the CAS latency.
Precharge Delay (tRAS)
The options are Auto, 5 CLK to 18 CLK.
8 8
Phoenix - AwardBIOS CMOS Setup Utility
MCT Memory Timing
TrwtT0
Twrrd
Twrwr
CS/ODT Pin Fine Delay
PU/PD/+/-: Change Priority
The BIOS will automatically detect all the MCT

memory timing.

This option allows you to manually configure the MCT
memory timing on the following fields.
MCT Memory Timing
Auto Enabled
Auto 4 CLK
Auto 18 CLK
Auto 5 CLK
Auto 5 CLK
Auto 3 CLK
Auto 24 CLK
Auto 3 CLK
Auto 6 CLK
Auto 3 CLK
Auto 105 ns
Auto 105 nS
Auto 105 nS
Auto 75 nS
Auto 75 nS
Auto 3 CLK
Auto 5 CLK
Auto 0 CLK
Auto 3 CLK
Enabled
F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC: Exit
F7: Optimized Defaults