LanParty JR 790gx m2rs User Manual page 76

3
BIOS Setup
Power On Function
This field allows you to use the PS/2 keyboard or PS/2 mouse to
power-on the system.
Button only
Password
Hot Key
MS Move&Click When this option is selected, move or click the
Any Key
Keyboard 98
KB Power On Password
Move the cursor to this field and press <Enter>. Enter your pass-
word. You can enter up to 5 characters. Type in exactly the same
password to confirm, then press <Enter>.
The power button will not function once a keyboard password has
been set in this field. You must type the correct password to power-
on the system. If you forgot the password, power-off the system and
remove the battery. Wait for a few seconds and install it back be-
fore powering-on the system.
Hot Key Power On
This field is used to select a function key that you would like to use to
power-on the system.
7 6
Default setting. Uses the power button to power
on the system.
When this option is selected, set the password
you would like to use to power-on the system in
the "KB Power On Password" field.
When this option is selected, select the function
key you would like to use to power-on the sys-
tem in the "Hot Key Power On" field.
mouse to power-on the system.
Press any key to power-on the system.
When this option is selected, press the "wake
up" key of the Windows
board to power-on the system.
®
98 compatible key-