LanParty JR 790gx m2rs User Manual page 12

1
Introduction
RAID RAID
RAID RAID RAID
Gigabit Gigabit Gigabit
Gigabit Gigabit
L L L L L AN
overclocked settings and being able to conveniently switch between
these settings simultaneously.
before it is installed into the system chassis.
C P U C P U C P U
C P U C P U
O v e r h e a t O v e r h e a t O v e r h e a t O v e r h e a t O v e r h e a t
Protection Protection Protection Protection Protection
down. This preventive measure has been added to protect the CPU
from damage and insure a safe computing environment.
IrDA IrDA
IrDA IrDA IrDA
distance of 1 meter.
12
The system board allows configuring RAID on Serial ATA
devices. It supports RAID 0, RAID 1 and RAID 0+1.
The Marvell 88E8056 PCI Express Gigabit LAN chip
supports up to 1Gbps data rate.
AN AN
AN AN
CMOS Reloaded is a technology that allows storing mul-
tiple user-defined BIOS settings by using the BIOS utility
to save, load and name the settings. This is especially
useful to overclockers who require saving a variety of
The options in Genie BIOS allows configuring the system
to optimize system performance and overclock capability.
The presence of the power switch and reset switch on
the system board are user-friendly especially to DIY us-
ers. They provide convenience in powering on and/or re-
setting the system while fine tuning the system board
CPU Overheat Protection has the capability of monitor-
ing the CPU's temperature during system boot up. Once
the CPU's temperature exceeded the temperature limit
pre-defined by the CPU, the system will automatically shut-
The system board is equipped with an IrDA connector
for wireless connectivity between your computer and pe-
ripheral devices. The IRDA (Infrared Data Association)
specification supports data transfers of 115K baud at a