LanParty JR 790gx m2rs User Manual page 54

3
BIOS Setup
Halt On
This field determines whether the system will stop if an error is
detected during power up. The default setting is All Errors.
No Errors
All Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
Base Memory
Displays the amount of base (or conventional) memory installed in
the system. The value of the base memory is typically 512K for
systems with 512K memory installed on the motherboard or 640K
for systems with 640K or more memor y installed on the
motherboard.
Extended Memory
Displays the amount of extended memory detected during boot-up.
Total Memory
Displays the total memory available in the system.
5 4
The system boot will not stop for any errors
detected.
The system boot will stop whenever the
BIOS detects a non-fatal error.
The system boot will not stop for a key-
board error; it will stop for all other errors.
The system boot will not stop for a disk er-
ror; it will stop for all other errors.
The system boot will not stop for a disk or
keyboard error; it will stop for all other er-
rors.