LanParty JR 790gx m2rs User Manual page 77

PWRON After PWR-Fail
Off
On
RTC Alarm Resume
Enabled
Disabled
Date (of Month)
0 The system will power-on everyday according to the
time set in the "Time (hh:mm:ss) Alarm" field.
1-31 Select a date you would like the system to power-on.
The system will power-on on the set date, and time set
in the "Time (hh:mm:ss) Alarm" field.
Resume Time (hh:mm:ss)
This is used to set the time you would like the system to power-on.
If you want the system to power-on everyday as set in the "Date
(of Month) " field, the time set in this field must be later than the
time of the RTC set in the Standard CMOS Features submenu.
When power returns after an AC power failure,
the system's power is off. You must press the
Power button to power-on the system.
When power returns after an AC power failure,
the system will automatically power-on.
When Enabled, you can set the date and time
you would like the Soft Power Down (Soft-Off)
PC to power-on in the "Date (of Month)" and
"Resume Time" fields. However, if the system is
being accessed by incoming calls or the network
(Resume On Ring/LAN) prior to the date and
time set in these fields, the system will give prior-
ity to the incoming calls or network.
Disables the automatic power-on function. (de-
fault).
3
BIOS Setup
7 7