LanParty JR 790gx m2rs User Manual page 128

6
ATI CrossFire Technology
CrossFireX
1. Power-off the system and monitor then unplug the power cord.
2. Remove the screw of the bracket that is opposite the PCIE 1
slot then remove the bracket.
3. Align the CrossFire Edition graphics card (Master) above the
PCIE 1 slot then press it down firmly until it is completely seated
in the slot.
4. Secure the graphics card with the screw you removed in step 2.
128
TM
Setup
Note:
The system board used in some of the illustrations may not
resemble the actual board. These illustrations are for reference
only.
PCIE 1
CrossFire Edition
graphics card