LanParty JR 790gx m2rs User Manual page 102

3
BIOS Setup
Save & Exit Setup
When all the changes have been made, highlight "Save & Exit Setup"
and press <Enter>.
Esc : Quit
F10 : Save & Exit Setup
Type "Y" and press <Enter>. The modifications you have made will
be written into the CMOS memory, and the system will reboot. You
will once again see the initial diagnostics on the screen. If you wish to
make additional changes to the setup, press <Ctrl> <Alt> <Esc>
simultaneously or <Del> after memory testing is done.
102
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status SAVE to CMOS and EXIT (Y/N)?
Genie BIOS Setting
CMOS Reloaded
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
↑ ↓ → ←
: Select Item
Load Fail-Safe Defaults