Download  Print this page

Advertisement

b
In the network settings screen, touch
beside "Setup Wizard".
Any available SSIDs are searched for and
displayed.
c
Select the SSID noted in step
touch the "OK" key.
The screen for entering the Network Key
(Password) appears.
Note
• If the desired network SSID is not displayed,
specify it as described below.
1) Select "[New SSID]", and then touch the
"OK" key.
*
"[New SSID]" appears at the bottom of the
list of detected SSIDs.
2) Type in the desired network SSID, and then
touch the "OK" key.
3) Specify the authentication method and
encryption mode.
4
a
, and then
d
Type in the Network Key (Password) noted in
a
step
, and then touch the "OK" key.
a
b
c
d
a Character input display
b Character keys
c Uppercase/lowercase selection key
d Space key
e Letter/number/special character selection key
f Backspace key (Deletes the character at the
cursor's position.)
g Cursor keys (Move the cursor to the left or
right.)
e
When the message shown below appears, touch
the "Yes" key.
The following screen appears and a connection is
established.
Touch the "Next" key, and then continue with
"Registering with ScanNCutCanvas for Your
Machine" on page 7.
If you have already completed the registration
with ScanNCutCanvas for your machine, touch
the "OK" key to finish the setup.
f
g
e

Advertisement

Table of Contents

   Also See for Brother 891-Z02

This manual is also suitable for:

891-z04891-z03

Comments to this Manuals

Symbols: 0
Latest comments: