Thank you for purchasing this cutting machine.
This guide provides setup instructions so that you can use a wireless network to send data created in
ScanNCutCanvas (http://ScanNCutCanvas.Brother.com/) to your cutting machine (hereafter referred to as
"machine") as well as save data that you have edited on your machine to ScanNCutCanvas. Carefully read the
instructions in this guide and complete the setup to easily transfer data without the need for any device such as
a USB flash drive.
Before using this machine, carefully read the "IMPORTANT SAFETY INSTRUCTIONS" in "Operation Manual".
For basic operations of your machine, refer to "Operation Manual".
For information on the operations of ScanNCutCanvas, refer to "Help" for ScanNCutCanvas.
In addition, after you have finished reading this guide, store it where it can quickly be accessed for future
Overview of "ScanNCut Online" for Data Transfer via a Wireless Network
You can use a wireless network to send data created in ScanNCutCanvas (http://ScanNCutCanvas.Brother.com/)
to your cutting machine as well as save data that you have edited on your machine to ScanNCutCanvas.
a Wireless network access point/router
b Computer/Tablet connected to wireless network access point/router
c Your machine
d Data saved to ScanNCutCanvas server
Perform the setup with the following steps.
Setting Up the Wireless Network Connection (page 3)
Registering with ScanNCutCanvas for Your Machine (page 7)