Adjusting The Direction Of The Air Flow; Advice On Energy Savings - Ariston A-MW07-EX Instruction Manual

ADJUSTING THE DIRECTION OF THE AIR FLOW

When you press the SWING button for 2 sec., the oscillating movement of the
directional flaps is enabled and the air flow is directed alternately downwards
and upwards to ensure the uniform diffusion of air throughout the room.
Press the SWING button again and the oscillating movement of the flaps stops
in the desired position and the air flow is directed in one direction only:
- we recommend you direct them upwards in cooling mode
(to avoid having the direct flow of cool air).
- we recommend you direct them downwards in heating mode
(as hot air tends to rise).
Warning: do not position the directional "flaps" manually, as their delicate
mechanism could be damaged.
The "deflectors", situated beneath the directional "flaps", should be positioned
manually and allow the air flow to be directed towards the left or right.
ATTENTION:
- Unplug the appliance or switch off the dedicated switch before performing any
operations (risk of personal injury from electrocution).
- Do not direct the air flow directly towards people, artworks or animals (risk of
causing damage to things and personal injury to people's skin)
- Do not insert or attempt to insert your fingers or various objects in the internal
and external unit air outlets and in the inlet grilles (risk of personal injury from
cuts).
- Do not touch the air conditioning unit with wet hands (risk of electrocution).

ADVICE ON ENERGY SAVINGS

·
Do not programme too high a temperature (in heating mode) or too low a tem-
perature (in cooling mode).
·
Avoid installing the internal/external units in places directly exposed to sunlight
(this could prevent the appliance from operating at its best).
·
Avoid opening and closing doors and windows too frequently, as the ongoing
heat exchange with the outside hinders the operation of the air conditioning unit.
·
Use the "Timer" for the timed starting of the appliance to prevent the appliance
from operating unnecessarily while you are out.
·
Use the "SLEEP" function at night.
ATTENTION:
- Do not attempt to perform maintenance operations requiring the opening of
the appliance yourself: the presence of live elements and the gas contained
in the cooling circuit make these operations particularly dangerous (risk of
personal injury from electrocution and cold burns).
- When moving home, contact an authorised specialist.
NOTES:
- In cooling mode, you may detect a slight mist coming out of the Internal Unit
for a few seconds: this is completely normal and due to the difference in tem-
perature between the air exiting the appliance and the air inside the room.
- During operation, you may hear a noise similar to the flowing of water: this is
completely normal, owing to the liquid refrigerant flowing through the piping.
- When the air conditioning unit starts or stops, especially in heating mode, you
may hear a little creaking: this is due to the thermal expansion of the parts
making up the appliance.
22
Direction Deflectors
al Flaps