Display; Indoor Unit Panel; “Auto/Cool” Button - Ariston A-MW07-EX Instruction Manual

DISPLAY

UK
The air conditioning unit is provided with a display which enables seve-
ral operation parameters to be visualised (see figure).
A. Indicates that the machine is switched on.
B. Operating in AUTO CLEAN mode.
C. Indicates that the TIMER is active.
D. Indicates the fan operating speed in the following sequence:
LOW
MED
HIGH
E. Indicates that the machine is operating.
F. Operating in CLEAN AIR mode.
The air conditioning unit has an "ioniser" device which generates a greater level
of comfort in terms of the air inside the room.
G. Operation in DEFROST mode.
H. Indicate the temperature set when the air conditioning unit is in operation.
If the AUTO CLEAN mode is activated the display shows the text SC.
This mode, which consists of alternate cooling, heating and ventilation cycles, is
intended to function as a cleaning mechanism for the air conditioning unit.
Operation is completely automatic and the appliance operates at low speed.
Once the cycle is complete the machine switches off automatically. The function
can only be activated after the COOL or DRY mode is selected.
I. Indicates that the TURBO function is active, either in heating or cooling mode.

INDOOR UNIT PANEL

"AUTO/COOL" BUTTON
1) "AUTO" FUNCTION
In this position, the appliance operates in AUTO mode.
2) "COOL" FUNCTION
This function is used exclusively by the installer when testing
the air conditioning unit.
ATTENTION:
do not touch the selector with wet hands (risk of personal
injury from electrocution).
18
A
B
C
D
AUTO/COOL
E
F
G
H
I