Can Not Power On; Log Shows "No Network Protocols Running - E-Lins H685m Series User Manual

Hide thumbs Also See for H685m Series:

Table of Contents

However, if you find the following status that it shows "Dialing" always,

Problem maybe:

Item. May caused by

WAN port is not right configed

SIM card has problem for data business

or no balance

No network signal

VPN configuration is wrong

Module modem is defeated

12.2 Can not power on

Solution:

1. Check if the power adapter connector is loose from the router.

2. Try to replace a power adapter. H685m series router uses 9V1.5A or 9V2A or 12V1A or 12V1.5A or 12V2A

power adapter with 2.5mm connector

3. Router hardware defeated. Send back to factory for check or repair.

Problem maybe:

Tel: +86 (755) 33231620 E‐mail: sales@szelins.com sales@e‐lins.com www.szelins.com

Solution

Refer to Chapter 4.1.2 WAN configuration to

solve it. For some module modem type, please

do not forget the command "CMD AT+CFUN=1"

at "Modem Info" of WAN configuration page.

Check the sim card with the ISP or network

provider or sim card provider.

Try another working sim card.

Move the router to another site to check.

You may config the VPN in wrong way. Please

check the WAN port configuration.

Send back the unit to factory for repair

E‐Lins Technology Co.,Limited

E-Lins H685m Series Router User Manual

Table of Contents