Configure Router As Ipsec Server - E-Lins H685m Series User Manual

Hide thumbs Also See for H685m Series:

Table of Contents

IP Address: input remote IP address range, for example the VPN server router IP is 192.168.10.254, so here

For the sever IP (remote IP), you can fill in the server IP address or server's DDNS.

Subnet Mask: 255.255.255.0

password:

Dynamic IP:

After configuration, save it and re-power on the router. Then the router will connect the VPN by IPSec.

Then you can find at "VPN—IPSEC status" the similar following pictures, which means the IPSec VPN is

connected successfully.

4.2.2 Configure Router as IPSec Server

Notes: this is not recommended. We recommend use CISCO VPN Server Router as a VPN server.

Configure 3g Router parameters as below.

Choose "Server", and click "Add VPN Setting" button to enter.

Tel: +86 (755) 33231620 E‐mail: sales@szelins.com sales@e‐lins.com www.szelins.com

we put 192.168.10.0

the same with in the server, this is unique with the user name from the VPN server

router.

Dynamic IP means opposite maybe Dial-up connection, so no input IP Address.

E‐Lins Technology Co.,Limited

E-Lins H685m Series Router User Manual

Table of Contents