Factory Default; Reset Via Web; Reset Via "Reset" Button - E-Lins H685m Series User Manual

4.3.2 Power off the router, then re‐power on to make the router work.
4.3.3 Close all WAN port.
If your router has WAN1 and WAN2, please close both of them.
If your router has WAN1, WAN2, WAN3 and WAN4, please close all of them.
Don't forget to save after closing each WAN port.
4.3.4 Click "SERVICE—Reset"
Reset the router. Then re-power on and config the router

4.4 Factory default

Router supplies factory default function for user setting. It has two different modes, web reposition mode and
reposition jack mode.
4.4.1 Reset via WEB
Click "services" in left menu, and select "Factory default".
When you choose "reset factory default", the system will display as below picture, click "confirm", the Router
setting will be lost and reset to factory default.
Default username:
Default password:
Default IP address:
Default Subnet Mask:

4.4.2 Reset via "reset" button

Use a shark tool to press the "R_RST" or "RST" button about 10 sec, it will restore the system parameter to
factory default.
For example, when you forget the web manage password of Router, you can do like this.
Tel: +86 (755) 33231620 E‐mail: sales@szelins.com sales@e‐lins.com www.szelins.com
admin
888888
192.168.0.254
255.255.255.0
E‐Lins Technology Co.,Limited
E-Lins H685m Series Router User Manual