E-Lins H685m Series User Manual page 16

Hide thumbs Also See for H685m Series:

Table of Contents

WCDMA: for WCDMA/UMTS/HSDPA/HSUPA/HSPA/HSPA+ router

TD: for TD-SCDMA router

g. Get DNS from ISP (Choose yes)

h. use compress (normally please choose No)

LCP AUTH: This parameter is from your ISP provider or sim card provider. If you don't know, you can

keep blank as default or select "None" or "AUTO" to try first. But better to confirm with your ISP

provider or sim card provider.

i. Modem Info: default keeps it as blank. But for modem type J, M, N, O, please input "CMD AT+CFUN=1

ATI ATI CSQ AT+CSQ", otherwise it will not dialup to internet.

j. Connection Interval: Here we suggest input 110 if you don't know your network signal is not good

enough. If signal is good, you can input 90.

Keep all others as default when we send the router because wrong setting may make the router no work.

Here set an example of China Unicom WCDMA network as follows,

After finishing the configuration, click "Save Button", then Click "Reboot Button".

Tel: +86 (755) 33231620 E‐mail: sales@szelins.com sales@e‐lins.com www.szelins.com

E‐Lins Technology Co.,Limited

E-Lins H685m Series Router User Manual

Table of Contents