Getting Started; Panel Introduction; The Port & Led State - E-Lins H685m Series User Manual

Hide thumbs Also See for H685m Series:

Table of Contents

3 Getting Started

Power supply interface: DC5V-27V power supply (9V or 12V suggested), Please the fixed necessary

Ethernet interface:

Antenna interface:

Notes: please install the sim card and antenna before plug the power adapter. Wrong operation will defeat the router

or the sim card.

3.2 The Port & LED State

3.2.1 Port

UART: DB9 transparent transmission port. Support RS232/RS485/TTL (Please confirm which one you need

before order).

PWR: Power input interface. DV5~27V, 2.5mm.

Tel: +86 (755) 33231620 E‐mail: sales@szelins.com sales@e‐lins.com www.szelins.com

power supply of connection product is ensured voltage and the current

parameter of power supply if customer exchanges with other power supply.

Special attention: If customer has changed the power supply, sometimes

can because of twinkling the current ability and leads to Router product

reboot inadequately

Can recognize voluntarily crosses or the straight networking winding thread,

and consult 100M voluntarily and 10M's network speed merit ability

standard SMA antenna interface

E‐Lins Technology Co.,Limited

E-Lins H685m Series Router User Manual

Chapter3

Table of Contents