E-Lins H685m Series User Manual page 50

Hide thumbs Also See for H685m Series:

Table of Contents

Step 3) It will show the following if the user creating is successful.

Step 4) VPN—PPTP, click

PPTP client. The Beginning IP and Ending IP range must be the same range with the router. For example, the

router's IP is 192.168.0.254, then you can put

After setting, please do not forget click "Apply" button and re-power on the router.

B. PPTP Client side setup.

There are two types. Users can take PC VPN dialup as client. Also we can take H685m router as client. We

test it one by one. Users can make your own choice.

B1. PC VPN dialup as VPN client.

Step 1) Get the PPTP server's WAN IP. Here we get the H685m PPTP server WAN IP is 113.115.216.52,

at the PC, try to ping it and check if it's through. If cannot through, please check if your ISP block the IP, or the

PPTP server get some problem.

Tel: +86 (755) 33231620 E‐mail: sales@szelins.com sales@e‐lins.com www.szelins.com

Enable

PPTP, and fill in

Beginning IP

E‐Lins Technology Co.,Limited

E-Lins H685m Series Router User Manual

Beginning IP

and

Ending IP,

as 192.168.0.110 and

which will be assigned to

Ending IP

as 192.168.0.200

Table of Contents