8.1 Configure DTU as server side
1. Tick "start",
2. Baudrate: select the correct one to match the connected device.
3. Parity: select right one.
4. Databits: select the right one
5. Local port: fill in the right one
6. Server addr: keep blank
7. Server port: keep blank
8. Other parameters: all keep as default. If blank please keep blank.
Configure the Port Forwarding feature for H685m.
Step 1)
Step 2)
Click
Apply
Button to start the setting. It will show the following picture.
Fill in the related parameters.
Tel: +86 (755) 33231620 E‐mail: sales@szelins.com sales@e‐lins.com www.szelins.com
E‐Lins Technology Co.,Limited
E-Lins H685m Series Router User Manual