Humminbird HELIX 9 Operation Manual page 85

Take Screen Snapshots
Screen Snapshots are saved pictures of the view on the screen. The screen snapshot will include the menus, dialog boxes, warnings,
and messages that were active when the screen snapshot was taken. Saved Screen Snapshots can be viewed from the Snapshot
and Recording View or Chart View.
NOTE: Screen Snapshot and Recording must be enabled to use the instructions in this section. See Enable Screen Snapshot and
Recording for details.
Take a Screen Snapshot
1. From any view or cursor location you want to capture, press the MARK key.
A waypoint will also be created at the boat or cursor location. The saved screen snapshot shares the same file name as the
waypoint (.PNG).
CAUTION! On the SD card, you will see that a DAT (or a .TXT) file is created for every .PNG screen snapshot. This data file is required
for viewing the screen snapshots from your control head, so don't delete these files.
Taking a Screen Snapshot
Take a Screen Snapshot
85 Screen Snapshots and Recordings