Navigation In Side Imaging Views - Humminbird HELIX 9 Operation Manual

N S
AVIGATION IN IDE
To mark waypoints and start navigation, the control head must have a GPS Fix from a connected or internal GPS receiver. See
Getting Started for more information.
Turn on/off SI Navigation
SI Navigation controls how the boat icon is displayed in Side Imaging Views. See Navigate to a Position for more information. If
SI Navigation is turned on, an arrow icon indicates the direction the boat needs to turn to reach the next waypoint during navigation.
If SI Navigation is turned off, the boat icon will not change during navigation although you can still mark waypoints and start
navigation from a Side Imaging View.
1. Main Menu: Press the MENU key twice. Select the Nav tab.
2. Select SI Navigation.
3. Select On or Off.
Mark a Waypoint
You can mark a waypoint at the boat position or the cursor position. Waypoints are saved to the Waypoint Management dialog box
(see Manage your Navigation Data).
Mark a Waypoint at the Boat Position
1. Press the MARK key.
Mark a Waypoint at the Cursor Position
1. Use the Cursor Control key to move the cursor to a position on the view.
2. Press the MARK key.
Navigate to a Position
Use the instructions in this section to start navigation to a position in the view. See Navigation Overview for more information about
these features.
Navigate to the Cursor Position
1. Use the Cursor Control key to move the cursor to a position on the view.
2. Press the GOTO key.
When you press the GOTO key, a waypoint will be marked at the cursor position.
Navigate to a Saved Position
If you press the GOTO key without using the cursor first, you can choose to start navigation from a list of saved waypoints and
routes.
1. Press the GOTO key.
2. Use the Cursor Control key to select a saved waypoint or route.
3. Press the RIGHT Cursor key to start navigation.
I V
MAGING IEWS
81 Side Imaging Sonar