Humminbird HELIX 9 Operation Manual page 69

Navigate to a Position
Use the instructions in this section to start navigation to a position in the view. See Navigation Overview for more information about
these features.
Navigate to the Cursor Position
1. Use the Cursor Control key to move the cursor to a position on the view.
2. Press the GOTO key.
When you press the GOTO key, a waypoint will be marked at the cursor position.
Navigate to a Saved Position
If you press the GOTO key without using the cursor first, you can choose to start navigation from a list of saved waypoints and
routes.
1. Press the GOTO key.
2. Use the Cursor Control key to select a saved waypoint or route.
3. Press the RIGHT Cursor key to start navigation.
Cancel Navigation
1. Press the MENU key once.
2. Select Cancel Navigation. Press the RIGHT Cursor key.
69 Down Imaging Sonar