Humminbird HELIX 9 Operation Manual page 115

Select a Waypoint in the Chart View
You can select a saved waypoint using the menu system or using the cursor on the Chart View.
Select a Saved Waypoint on the Chart View
1. Use the Cursor Control key to move the cursor to a waypoint on the Chart View.
Edit: Press the MENU key. Select the waypoint from the menu. Press the RIGHT Cursor key. Select Edit.
More Info: Press the CHECK/INFO key.
Start Navigation: Press the GOTO key.
2. Exit Cursor: Press the EXIT key.
Select the Last Saved Waypoint
1. Press the MENU key.
2. Select the waypoint name from the X-Press Menu.
3. Press the RIGHT Cursor key.
4. Select a menu from the waypoint menu.
Search and Select a Saved Waypoint
Use these instructions to search quickly for a waypoint, which is helpful if you cannot locate it on the Chart View.
1. Chart X-Press Menu: With a Chart View displayed on-screen, press the MENU key once.
2. Select Cursor to Waypoint. Press the RIGHT Cursor key.
3. Use the Cursor Control key to sort the list.
4. Select the waypoint name from the menu. Press the RIGHT Cursor key.
5. Press the EXIT key once.
6. The cursor will select the waypoint on the Chart View.
Edit: Press the MENU key. Select the waypoint from the menu. Press the RIGHT Cursor key. Select Edit.
More Info: Press the CHECK/INFO key.
Start Navigation: Press the GOTO key.
115 Waypoints