Control Type Patterns; Programming A Control Type Pattern; Grid Programming - Social Entropy Engine User Manual

PATTERNS

CONTROL TYPE PATTERNS

Control type patterns are useful for recording specific controller values or automating
playback of controller modulation. A control pattern can record up to six control values
per step, which map to the six control knobs. The LFO mode of the control pattern can be
used to create periodic modulation of any of the six control values.

PROGRAMMING A CONTROL TYPE PATTERN

Control type patterns can be programmed using grid programming, step programming or
realtime recording. Each method has it's strengths, so you can choose the appropriate
method for your situation. Realtime recording and step recording can also be used
simultaneously with grid programming, allowing for very interactive sequencing.

GRID PROGRAMMING

Grid programming mode is the default mode and is always active, meaning that you
don't need to enter record mode to use grid programming. Grid programming allows you
to enter control values using the pattern step buttons. You can see the which steps have a
recorded control value on the step LEDs. The programmed controls are visible and can
be edited while holding down a step button.
90 USER GUIDE