Support For Elektron Turbomidi - Social Entropy Engine User Manual

GLOBAL CONFIG

SUPPORT FOR ELEKTRON TURBOMIDI

Engine supports the TurboMIDI standard developed by Elektron Music Machines AB.
When used with other devices that support TurboMIDI, Engine can negotiate speeds up to
10x MIDI on MIDI output 1.
To use TurboMIDI, connect the MIDI input and MIDI output 1 from Engine to the MIDI
output and input of the other device.
negotiation. This will vary depending on the other device, for example, on the Elektron
TM-1 MIDI interface, press the "TURBO" button.
After successful negotiation, Engine will use TurboMIDI speed for all communications on
MIDI input and MIDI output 1.
You can see the current status of TurboMIDI in CONFIG mode, by checking the TIME LED.
To force TurboMIDI to disable, you can click the TIME button while in CONFIG mode.
TurboMIDI will also be disabled when rebooting Engine.
NOTE: TurboMIDI requires that MIDI input and output of both devices
be connected. TurboMIDI is only supported on Engine MIDI
output 1. MIDI output 2 will continue to operate at normal MIDI
speed. TurboMIDI is disabled when USB MIDI is active.
On the other device, initiate a TurboMIDI
141 USER GUIDE