Adding Or Changing A Control Value - Social Entropy Engine User Manual

PATTERNS

ADDING OR CHANGING A CONTROL VALUE

To add a new step event, click and hold the pattern step button where you wish to place
the event. Continue to hold down the step button and then rotate one of the six control
knobs to record a new control value. The control value will be automatically activated
when turning the control knob
You can also use the corresponding six white keys of the mini-keyboard to activate or
deactivate the current stored control value for the step.
To deactivate all control values on a step, you can quickly click the step button.
If you wish to edit an existing step, you can press and hold the step button and the step
will not be deactivated when releasing the step button.
91 USER GUIDE