Setting Velocity Or Accent - Social Entropy Engine User Manual

PATTERNS

SETTING VELOCITY OR ACCENT

Each step of a synth type pattern can have a velocity set from 0-127. For quick
programming, the ACCENT button can be used to set a predefined velocity for accented
or unaccented notes.
To set the velocity of a note using the ACCENT button, press and hold the pattern step
button. Then click the ACCENT button to accent turn on or off.
To set a precise velocity for the step, while holding the step button, use control knob 1 to
set a velocity value from 0-127. The current velocity of the step is shown on the LED
display.
TIP: You can quickly enter an accented step by double clicking the
pattern step button as you enter the step event.
74 USER GUIDE