Step Recording - Social Entropy Engine User Manual

PATTERNS

STEP RECORDING

Step recording is an alternate way to enter a monophonic sequence of notes and timing
by moving from one step to the next in sequence. This can be done while the sequencer is
running or stopped.
To enter STEP RECORD, press and hold (or double click) the FUNCTION button, then
click the RECORD button. Both the FUNCTION and RECORD LEDs will blink to indicate
you are in STEP RECORD mode.
The current step location is indicated on the pattern step buttons with a bright blinking
LED. You can immediately jump to a particular step by clicking a pattern step button, or
begin entering step events from the beginning of the sequence.
To enter steps, you can click pitches on the mini keyboard buttons, the step will
automatically advance to the next step.
TIP: When the sequencer is not playing, the selected pitch will be
played as it is entered. This makes it easier to preview the
programmed notes.
If you play the keyboard legato (hold down two notes simultaneously) it will automatically
create a slide and advance to the next step.
77 USER GUIDE