Setting Knob Controller Numbers - Social Entropy Engine User Manual

GLOBAL CONFIG

SETTING KNOB CONTROLLER NUMBERS

The MIDI controller number for each control knob can be set separately. This allows each
control knob to be used to control a different parameter of a device if needed.
To set the MIDI controller number for a control knob, while in CONFIG mode, press and
hold pattern step button 2, then turn the control knob you wish to set. The controller
number of the knob will be displayed on the LED display. You can set the controller
number from the range 0 to 127.
If you just want to view the current controller assigned to a knob without changing it,
while holding pattern step button 2, press and hold the track select button corresponding
to the controller knob that you wish to view.
When the MIDI channel for a knob is set to "tr" (track), the controller number is specific to
the selected track. In this case, the controller number selected in CONFIG mode is not
used.
For more details on setting the track specific controller number, please see the section on
UTILITY mode.
126 USER GUIDE