Step Recording - Social Entropy Engine User Manual

PATTERNS

STEP RECORDING

Step recording is an alternate way to enter drum triggers by moving from one step to the
next in sequence. This can be done while the sequencer is running or stopped.
To enter STEP RECORD, press and hold (or double click) the FUNCTION button, then
click the RECORD button. Both the FUNCTION and RECORD LEDs will blink to indicate
you are in STEP RECORD mode.
The current step location is indicated on the pattern step buttons with a bright blinking
LED. You can begin entering step events from the beginning of the sequence immediately
or you can jump to a particular step by clicking a pattern step button.
In STEP RECORD mode, the white buttons of the mini-keyboard function as drum pads for
the 8 drum instruments. To enter triggers, click the white buttons of the mini keyboard
buttons, the step will automatically advance to the next step.
If you hold down multiple drum instrument buttons simultaneously, you can add drum
triggers for multiple instruments on the same step.
You can also add ACCENT to a step by clicking the ACCENT button while holding the
drum instrument button.
55 USER GUIDE