Track Quantization - Social Entropy Engine User Manual

TRACKS

TRACK QUANTIZATION

Quantization can be enabled or disabled per track. Quantization only applies to input
during realtime recording of synth type patterns.
Quantization is enabled by default. This forces incoming notes to be a multiple of 50%
gate length, the same as a 303 type sequencer. The beginning of a note will be hard
quantized to the step.
When quantization is disabled, the gate length of the note will be set to the nearest clock
tick, allowing more expressive sequences to be captured. The start of the note will be
recorded with the nearest delay value for the step.
To enable or disable TRACK QUANTIZATION, while in UTILITY MODE, click the TIME
button.
When quantization is enabled, the TIME LED will be lit, when quantization is disabled, the
TIME LED will be unlit.
38 USER GUIDE