MGE UPS Systems PULSAR M 3000 RT 3U XL Installation And User Manual page 27

E E N N G G L L I I S S H H
Battery-module removal
Mounting the new battery module
Carry out the above instructions in reverse order.
◗ To ensure safety and high performance, use only batteries supplied by MGE Office Protection Systems.
◗ Take care to firmly press together the two parts of the connector during remounting.
86-86710-00 A01
Installation and User Manual
A. Unscrew the left-hand side of the front panel
(two screws), then remove the part.
B. Disconnect the battery block by separating the
two connectors (never pull on the wires).
C. Unscrew the metal bracket and remove the
part.
D. Pull out the battery pack.
Maintenance 5 — 3