Press the button for 1 second.
RAYMARINE version: The auto pilot comes out of MOTORISED HELM mode and goes into
STAND-BY mode.
SIMRAD version: The auto pilot comes out of POWER mode and goes into STAND-BY
mode.
The joystick goes into STAND-BY.
The «Ready» LED is a steady red.
The system switches automatically to control lever function.
If the lever is not in the neutral position it must be put into neutral before using.
Explanatory note regarding the joystick in flashing red «Ready» LED mode:
When the red «Ready» LED is flashing, this indicates that a malfunction has been detected in the system. This malfunction
may occur when the engine is started or the joystick is used.
In some cases, this fault may be resolved by completely restarting the system (Recommence starting procedure set out
above).
If after restarting the joystick is still not working, use the engine control lever and bow thruster manually.
If control lever is not working, apply emergency procedure SAFETY set out in owner's manual ZF.
Engine
QUIT JOYSTICK MODE
10 10
155
W
ARNING
- To retake control with the engine control lever, it is
essential to disengage the joystick by pressing the
button behind the joystick.