Electrical Circuit, 24 V - BENETEAU OCEANIS 58 Owner's Manual

Table of Contents

Advertisement

G
ENERAL INFORMATION
E
LECTRICAL PANEL
The electrical switchboard does not require any routine maintenance . In case an electric appliance is not
energized, check:
- The main power supply (batteries, battery switches).
- The switches and circuit breakers on the line.
- the relevant electrical unit.
The fuel gauge can be read by pressing the switch.
E
, 24 V
LECTRICAL CIRCUIT
G
ENERAL RECOMMENDATIONS
- Never work on a live electric fitting.
- The batteries must be strongly fastened.
- Do not block the battery ventilation ducts, some of them may give off hydrogen which represents a
danger of explosion.
- The batteries must be handled with care. In the case of contact with electrolyte thoroughly rinse off the
affected part of the body and consult a doctor.
- To avoid short-circuiting between the battery poles do not store conducting objects near to the batteries
(metal tools, etc...).
- Turn off the electrical circuit with the battery switches when installing batteries or during their connection/
disconnection.
- Never modify the specifications of power overload protection devices.
- Never modify an installation. Use the services of a qualified marine electricity technician.
- Never install or replace the electric appliances (or any electric equipement) by components exceeding
the capacity (amperage) of the circuit.
- Do not leave the vessel unattended when the electrical system is switched on .
- Certain lights represent a significant heat source, be careful of surrounding objects.
Note, the son of the 24 V circuit are white or brown for the blue and more for less.
Electrical equipment
97
9
D
ANGER
-There may be danger of fire or explosion if
direct current systems are incorrectly
used.
W
ARNING
-Handle the batteries with care (Please
refer to the manufacturer's instructions.
-In
case
of
electrolyte
thoroughly rinse the part of the body that
has been in conctact with it. Obtain
medical advice.
A
DVICE
-Keep the batteries clean and dry in order
to avoid premature wear.
-Periodically check the electrolyte level.
Add distilled water when needed.
-Tighten
and
maintain
connectors by greasing them regularly.
-Disconnect the batteries during winter
storage or long periods of inactivity.
splashing,
- R
ECOMMENDATION
the
terminal

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents