Warnings - BENETEAU OCEANIS 58 Owner's Manual

In case of malfunction, the system warns the user when a
fault is detected by means of a sound code and by the
flashing of light 2.
N°
1 Control lever position sensor error.
2 Activator communication error.
3 Shift engagement error.
4 Throttle activator error.
5 Not Applicable.
6 Acceleration warning.
7 Shift engagement warning.
Engine
Designation

Warnings

Description
Control activation failure. The system is set in a safety
condition (throttles at minimum and shifts in neutral).
In case of communication errors, the system is set in safety
condition (throttles at minimum and shifts in neutral). When the
lever is reset to idle, the system tries to restore normal
functions. If the error is not cleared, the system stops.
The system is set in safety condition (throttles at minimum and
shifts in neutral). When the lever is reset to idle, the system
tries to restore normal functions. If the error is not cleared, the
system stops.
In case of mechanical activator blockage (if applicable), the
system waits for two seconds and then it will attempt to enter
safety condition (throttles at minimum and shifts in neutral).
Warnings indicate external conditions that might reduce
system performance, such as low supply voltage or control
cables caught between actuators and engines.
Warnings indicate external conditions that might reduce
system performance, such as low supply voltage or control
cables caught between actuators and engines.
142
Audible alarm
Long, Long, Long.
Short, Short, Long.
Short, Long, Short.
Short, Long, Long.
Long, Short, Short.
Long, Short, Long.
Long, Long, Short.