Advanced Settings - versa VX-AP450N User Manual

4.3 Advanced Settings

This section mainly deals with wireless advanced settings, including Basic Data Rate,
Beacon Interval, and Fragment Threshold etc. Select Wireless Settings -> Advanced
Settings to enter the following page:
Setting Explanation
 BG Protection Mode: For 11b/g wireless client, it is easier to connect with 11n wireless
device. The default is Auto.
 Basic Data Rates: In term of different requirements, you can select one of the suitable
Basic Data Rates from the drop-down list. Default (1-2-5.5-11Mbps) is the default
setting. It is recommended not to change the default value.
 Beacon Interval: The frequency interval of the beacon, which is a packet broadcast by
an AP to synchronize a wireless network. The default value is 100ms.
 Fragment Threshold: The fragmentation threshold defines the maximum transmission
packet size in bytes. The packet will be fragmented if the arrival is bigger than the
threshold setting. The default size is 2346 bytes.
 RTS Threshold: RTS stands for Request to send. This parameter controls what size
data packet the frequency protocol issues to RTS packet. If the device works in SOHO,
do not change the default value.
 TX Power: Set the wireless output power level. The default value is 100.
 WMM Capable: To enhance wireless multimedia transfer performance (0n-line video
and voice). If you are not clear about this, enable it.
 APSD Capable: It is used for auto power-saved service. The default is Disable.
25