Samsung NX5837750SS User Manual page 73

Surface burner
clicks during
operation.
The control knob has been
left in the LITE position.
After the burner lights, turn the control
knob to a desired setting.
If the burner still clicks, contact a
service technician.
The burners do Surface burner components See 66.
not burn evenly, and caps are not assembled
correctly and level.
Surface burners are dirty. Clean surface burner components.
I
(See 65.)
Wrong orifice is assembled. Very large or
yellow surface
burner flames.
i
Surl:ace burners
Check the burner orifice size and
contact your installer if you have
The oven door lock is
the wrong orifice (LP gas instead of
natural gas or natural gas instead of
LP gas).
The display will show the Lock icon.
light but oven
burners do not ,
i
turned on.
Hold the oven door open and press the
START/SET button for 3 seconds. The
oven will beep and the Lock icon will
turn off.
Gas Pressure Regulator
shut off switch is in the 'off
position.
Call a qualified service technician.
English 73
NXSgJ7750SS DG6g 00623A 0O ENindd 73