Table of Contents
Advertisement
Available languages
Available languages
•
Use a dedicated !20-volt,
60-Hz, 30-amp, AC, fused electrical circuit for this range. A
time-delay
fuse or circuit breaker is recommended.
Do not plug more than one appliance
into this circuit.
•
Do not connect the ground wire to plastic plumbing
lines, gas lines, or hot water pipes.
•
This range must be Earth grounded.
In the event of a malfunction
or breakdown,
grounding
will reduce the risk of electrical
shock by providing
a path for the electric
current. This range is equipped with a cord having a grounding
plug. The plug must
be firmly
plugged into an outlet that is properly
installed and grounded in accordance
with the local codes and ordinances.
If you are unsure whether your electrical outlet is
properly
grounded,
have it checked by a licensed electrician.
•
The range is supplied with a 3-pronged
grounded
plug. This cord must be plugged into
a mating, grounded 3-prong
outlet that meets all local codes and ordinances.
If codes
permit the use of a separate ground wire, we recommend that a qualified
electrician
determine
the proper path for this ground wire.
•
Electrical service to the range must conform to local codes. Barring local codes, it
should meet the latest ANSI/NFPA No. 70 - Latest Revision (for the U.S.) or the Canadian
Electrical Code CSA C22.1 - Latest Revisions.
•
It is the personal responsibility
of the range owner to provide the correct electrical
service for this range.
Installation
safety
A
WARNING
To reduce the risk of fire, electric shock(, personal injuries, and/or death, obey the following
precautions.
•
Have your range installed and properly
grounded
by a
qualified
installer,
in accordance with the installation
instructions.
Any adjustment
and service should be
performed
only by qualified
gas range installers or
service technicians.
•
Do not attempt to service, modify, or replace your
range or any part of your range unless it is specifically
recommended
in this manual. All other service should
be referred to a qualified
technician.
•
Always use new flexible connectors when installing
a gas appliance. Do not use old
flexible connectors.
•
Make sure the anti-tip
device is properly
installed on the range. See the installation
instructions
for more information.
English
11
NX5817750SS
DG68
00623A
0OENindd
I1
Advertisement
Table of Contents
