Cooktop Safety - Samsung NX5837750SS User Manual

Table of Contents

Advertisement

Available languages

Available languages

If the range is located near a window, do not hang long curtains or paper blinds on that
window.
For the range to ventilate
properly, make sure the range's vents are not blocked, and that
there is enough clearance at the top, back, sides, and underneath
the range. The vents
allow the necessary exhaust for the range to operate properly
with correct combustion.
Make sure the wall coverings
around the range can withstand
heat up to 200 °F (93 °C)
generated
by the range.
Cabinet storage above the surface of the range should be avoided. If cabinet storage
above the range is necessary: allow a minimum
clearance of 40 inches (!02 cm) between
the cooking surface and the bottom of cabinets; or install a range hood that projects
horizontally
a minimum
of 5 inches (!2.7 cm) beyond the bottom of the cabinets.
Cooktop safety
A
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following
precautions.
Make sure all burners are off when not in use.
Do not use aluminium
foil to line the grates or any
part of the cooktop. It may cause carbon monoxide
poisoning. Aluminum
foil linings may also trap heat,
causing a fire hazard.
Do not leave burners unattended
on medium or high
heat settings.
Before igniting, make sure all burner caps are properly
in place and all burners are level.
Always use the LITE position when igniting
the burners and make sure the burners have
ignited. If ignition fails, turn the knob to OFF and wait until the gas has dissipated.
When you set a burner to simmer, do not turn the knob quickly. Make sure the flame
stays on.
Do not place any objects other than cookware on the cooktop.
This cooktop is designed to cook with a wok or wok ring attachment.
To flame food, you
must have a ventilation
hood. When you flame food, the hood must be on.
Before removing
or changing cookware, turn off the burners.
Remove food and cookware
immediately
after cooking.
Before removing
any parts of the burner for cleaning, make sure the range is off and
completely
cool.
After cleaning the burner spreader, make sure it is completely
dry before re-assembling.
English
13
NX5817750SS
DG68
00623A
0OENindd
13

Advertisement

Table of Contents
loading

Table of Contents