Items On The Basic Menu - Fronius Galvo 1.5-1 Operating Instructions Manual

Items on the Ba- The Basic menu contains the following items:
sic menu
MPP Tracker 1
-
-
-
USB log book
Activates or deactivates the function for saving all error messages to a USB flash drive
AUTO / OFF / ON
Input signal
-
-
-
SMS / relay
-
-
Grounding setting
-
-
Insulation mode
-
-
DC operating mode:
MPP AUTO
FIX
MPP USER
Fixed voltage:
for inputting a fixed voltage, 120 - 440 V
MPPT1 initial voltage:
for inputting the MPPT1 initial voltage, 120 - 440 V
How it works:
Ext Sig. / S0 meter / OFF
Triggering method (with "Ext. Sig." mode of operation):
Warning / Ext. Stop
Connection type (with "Ext. Sig." mode of operation):
N/C / N/O
Event delay
for inputting the time delay after which an SMS is sent or the relay is to switch
900 - 86,400 seconds
Event counter:
for entering the number of errors after which an SMS is sent or the relay is to switch:
10 - 255
Grounding mode:
Off / Positive / Negative
Ground monitoring:
Off / Warn Err / Error / Warning
Insulation warning:
for activating and deactivating insulation monitoring, with display of a warning without
interruption of feed-in if there is an insulation fault
ON / OFF (depends on the country setup)
Threshold warning:
for setting an insulation threshold at which the inverter produces a warning (without
interruption of feed-in)
0 - 1000 kOhm (depends on the country setup)
41