Setup Menu Item; Initial Setting; Setup; Navigating In The Setup Menu Item - Fronius Galvo 1.5-1 Operating Instructions Manual

SETUP menu item

Initial setting

The inverter is pre-configured and ready to use. There is no need to enter any initial set-
tings before using it to feed energy into the grid, as this is a fully-automated process.
The SETUP menu item allows the initial settings of the inverter to be changed easily to
bring it in line, as closely as possible, with the preferences and requirements of the user.

SETUP

G R A P H
Navigating in the Enter the SETUP menu item
SETUP menu item
G R A P H
Menu level, 'SETUP' selected
R e l a y
'Standby' entry
Scrolling between the entries
R e l a y
Example: 'WiFi Access Point' menu item
Exiting an entry
NOTE! As a result of software updates, you may find that your device has certain
functions that are not described in these operating instructions, or vice versa. Cer-
tain illustrations may also differ slightly from the actual controls on your device.
but these controls function in exactly the same way.
SETUP
(Setup menu)
In the menu level, use the 'Left' or
1
'Right' keys to select the 'SETUP'
menu item
Press the 'Enter' key
2
The first entry under the SETUP menu
item is displayed:
'Standby'
Use the 'Up' and 'Down' keys to move
3
between the available entries
23