Setup Menu Item; Initial Setting; Setup; Navigating The Setup Menu Item - Fronius Primo 3.0-1 Operating Instructions Manual

SETUP menu item

Initial setting

The inverter is pre-configured after commissioning has been completely carried out (e.g.
using the Installation Wizard) according to the country setup.
The SETUP menu item allows the initial settings of the inverter to be changed easily to
bring it in line, as closely as possible, with the preferences and requirements of the user.

SETUP

As a result of software updates, you may find that your device has certain functions
that are not described in these Operating Instructions, or vice versa.
Certain illustrations may also differ slightly from the actual controls on your device, but
these controls function in exactly the same way.
Navigating the Entering the SETUP menu item
SETUP menu item
Menu level, "SETUP" selected
"Standby" entry
Scrolling between the entries
22
G R A P H
NOTE!
G R A P H
R e l a y
SETUP
(Setup menu)
At the menu level, use the "Left" or
1
"Right" keys to select the "SETUP"
menu item
Press the "Enter" key
2
The first entry under the SETUP menu
item is displayed:
"Standby"