Stanford Research Systems SR865 Operation Manual page 100

82 Operation
black background with white and Monochrome is black and white. Screen shots also
contain the time/date and summary of input parameters.
The
Busy
[Blank]
Press the [Blank] key to operate with the front panel display and LEDs off. The SR865 is
still operating, the outputs are active, data collection continues and the unit responds to
interface commands. To change a setting, press [Blank] to return to normal operation,
change the desired parameter, then press [Blank] again.
The Blank
[Config]
The SR865 displays up to 4 channels at a time, in green, blue, yellow and orange. Each
channel is assigned a parameter using the [Config] key. Parameters are chosen from X,
Y, R, θ (detected), F
or Output, Xnoise, or Ynoise .
Highlight one of the channel's Display tile, then select a parameter from below to assign
it to the channel.
Displayed parameters can be re-assigned at any time. Data is being stored for all
parameters all of the time.
SR865 DSP Lock-in Amplifier
LED indicates that the USB stick is busy and should not be removed.
LED is lit while the rest of the display is off.
, F , Reference Phase, Sine Amplitude, DC Level, any Aux Input
int ext
Chapter 3