Checking The Connection Status; Checking The Decode Channel Status - HIKVISION DS-6400HDI-T User Manual

User Manual of DS-6400HDI-T Decoder
Note: The picture must be in 32-bit BMP format and its width and height must be 32X pixel, with up to 128×128
resolution and 24 bits depth.

4.1.7 Checking the Connection Status

Purpose:
Connection status shows the status of the decoding status and the network connection status of the decode channel.
Steps:
Click Decode OperationDecode Status Connection Status to view the connection status of the current decode
channel.
You can see status of the network connection is displayed on the interface.
Note: The Connection Status of device will be refreshed regularly.

4.1.8 Checking the Decode Channel Status

Click Decode OperationDecode Status Decode Channel Status to view the status information of the current
decode channel, including the channel number, decode status, encode type, etc. Refer to the following interface:
Note: The Decode Channel Status of device will be refreshed every 4 seconds.
28