Tools; Admin - D-Link DIR-822 User Manual

Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.

Admin

Enter a new password for the Administrator Login Name. The
Password:
administrator can make changes to the settings.
User Password:
Enter the new password for the User login. If you login as the
User, you cannot change the settings (you can only view them).
Gateway name:
Enter a name for your router.
Enable Graphical
Enables a challenge-response test to require users to type
Authentication:
letters or numbers from a distorted image displayed on the
screen to prevent online hackers and unauthorized users from
gaining access to your router's network settings.
Enable HTTPS
Check to enable HTTPS to connect to the router securely.
Server:
This means to connect to the router, you must enter
https://192.168.0.1 (for example) instead of http://192.168.0.1.
Enable Remote
Remote management allows the DIR-822 to be configured from
Management:
the Internet by a web browser. A username/password is still
required to access the Web Management interface.
Remote Admin
The port number used to access the DIR-822 is used in the URL.
Port: Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP
address of the DIR-822 and 8080 is the port used for the Web
Management interface.
D-Link DIR-822 User Manual

Tools

Admin
92