Section 3 - Configuration
Enable Automatic IPv6
Check to enable automatic IPv6 address assignment.
Address Assignment:
Enable Automatic DHCP-
Check to enable automatic DHCP-PD in LAN.
PD in LAN:
Select Stateful (DHCPv6), SLAAC + RDNSS or
Autoconfiguration Type:
SLAAC + Stateless DHCPv6.
Enter the start IPv6 address for the DHCPv6 range
IPv6 Address Range Start:
for your local computers.
Enter the end IPv6 address for the DHCPv6 range
IPv6 Address Range End:
for your local computers.
Enter the IPv6 address lifetime (in minutes).
IPv6 Address Lifetime:
D-Link DIR-822 User Manual
67