Network Filters - D-Link DIR-822 User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the router.
Configure MAC Select Turn MAC Filtering Off, Allow MAC addresses listed
Filtering: below, or Deny MAC addresses listed below from the drop-
down menu.
MAC Address: Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer to the
Networking Basics on page 137 section in this manual.
DHCP Client: Select a DHCP client from the drop-down menu and click << to
copy that MAC address.
D-Link DIR-822 User Manual

Network Filters

77