D-Link DIR-822 User Manual page 30

Section 3 - Configuration
Step 3: Internet Connection (L2TP)
After selecting the L2TP Internet connection method, the following page
will appear:
The following parameters will be available for configuration:
Address Mode:
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP Address:
L2TP Server IP Address:
User Name:
Password:
Verify Password:
Primary DNS Address:
Secondary DNS Address:
Click Next to continue.
D-Link DIR-822 User Manual
Here the user can specify whether this Internet
connection requires the use of a dynamic or
static IP address. L2TP usually requires a
dynamic IP configuration.
Enter the L2TP IP address used here. This
option is only available if Static IP is selected.
Enter the L2TP subnet mask used here.
Enter the L2TP gateway IP address used here.
Enter the L2TP server IP address used here.
This is normally the same as the L2TP gateway
IP address.
Enter the L2TP username used here.
Enter the L2TP password used here.
Re-enter the L2TP password used here.
Enter the primary DNS IP address used here.
Enter the secondary DNS IP address used here.
This field is normally optional. Only one DNS
address is required for a functional Internet
connection, but using a second DNS address
provides more stability.
26