Table of Contents
Advertisement
DIR-430 RangeBooster G Wireless Router User's Guide
Tools
The Tools configuration pages in the DIR-430 provide the administrator access to
system specific items.
Admin
Admin configurations allow the administrator account to be modified as well as
enabling/disabling box access from the Internet.
User Name / Password
The default username/password of the Gateway can be overridden with your own
for the security reasons. To change the user's password, click on Tools item in
the top panel, then on Admin on the left hand menu to show the configuration as
specified below. The User's password can be set using this, overriding the old
password.
To change the password, enter the default or current password in the "Old
Password:" field.
The user name can be changed from admin to any name you like. This is optional
field. There is only one administrator user account for the DIR-430.
Your new password should be entered in "New password:" field. Re-type the new
password in "Confirm new password:" field for confirmation. Press Apply
Changes button to reflect your password changes.
User must remember the password or note it down in a safe place to access the
DIR430 configuration further. In case, you forget the password to access the
DIR-430, reset to factory defaults by holding in the reset button for 8 to 10
seconds.
Page 78 of 103
.0
Version : 1
Advertisement
Table of Contents
