Tools; Admin - D-Link DIR-803 User Manual

Section 3 - Configuration
This page will allow you to change the Administrator password and also enable Remote Management.
Password: Enter a new Password for the Administrator login. Enter again to verify.
Enable Graphical Check to enable a challenge-response test that requires users to type letters
Authentication: or numbers from a distorted image displayed on the screen. This helps
prevent online hackers and unauthorized users from gaining access to your
router's network settings.
Enable HTTPS Check to enable HTTPS to connect to the router securely. This means to
Server: connect to the router, you must enter https://192.168.0.1 (for example)
instead of http://192.168.0.1.
Enable Remote Remote management allows the DIR-803 to be configured from the Internet
Management: by a web browser. A username/password is still required to access the Web
Management interface.
Remote Admin Port: The port number used to access the DIR-803 is used in the URL. Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-803
and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS Server, you must enter https:// as part of the
URL to access the router remotely.
Remote Admin Select Allow All or Deny All from the drop-down menu.
Inbound Filter:
Details: This field will display the current remote admin filter.
Click Save Settings.
D-Link DIR-803 User Manual

Tools

Admin

85