D-Link DIR-822 User Manual page 70

Section 3 - Configuration
Select PPPoE from the drop-down menu.
My IPv6 Connection:
PPPoE: Enter the PPPoE account settings supplied by your
Internet provider (ISP).
Address Mode: Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name:
Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype the
password in the next box.
Service Name: Enter the ISP service name (optional).
Reconnection Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle Time: Enter a maximum idle time after which the Internet
connection will be dropped due to inactivity. To
disable this feature, enable Auto-reconnect.
MTU:
Maximum Transmission Unit - you may need to
change the MTU for optimal performance with your
specific ISP. 1492 is the default MTU.
IPv6 DNS Settings: Select either Obtain DNS server address
automatically or Use the following DNS Address.
Primary/Secondary DNS Enter the primary and secondary DNS server
Address:
addresses.
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the router's LAN link-local address.
D-Link DIR-822 User Manual
PPPoE
66